Pellet burner BurnPell M 500 – most innovative pellet burner on the market. The breakthrough technology is highly advanced walking grate system in combustion chamber. Apart from high burning efficiency, reaching up to 99%, this unique solution ensures permanent self – cleaning from ashes collecting in the process of combustion. Pellet burner BurnPell M 500 designed to burn wood biomass pellets, agro-pellets with high content of ashes, pits and oats.
| Instruction for control panel S.Control MK2 |  |
Product Description
Pellet burner BurnPell M 500 – economical, easily maintained, comfortable and modern heating system with pellets for residential, public and commercial premises. Pellet burner could be installed in practically any solid fuel, gas or oil boiler, furnace or stove which power is up to 300 – 500 kW. Pellet burner power varies from 120 kW to 500 kW.
The complete set of pellet burner includes:
- pellet burner BurnPell M 500;
- polyurethane pipe connecting the burner with feeder;
- pellet feeder;
- external digital control panel with LCD display.
The container for pellets is not included and could be ordered separately. As the tank (container) can be used in any capacity, from which a transporter can to take the pellets and transport them into the burner. Thus, set of burner consists of full fuel supply system that solves all problems and you need only to load the container with pellets and set up desired temperature of water.
During burning pellets do not be afraid of electricity supply disruptions, due to the electricity cut-outs. After cut-out burner starts to work by itself and you do not have to re-establish the settings. Control panel display screen shows all the settings in real time. Also, if desired, to respond to changes in outdoor temperature, possible to install an additional outdoor air temperature sensor.
As fuels pellet burner uses biomass pellets – alternative ecologic (green) fuel. Therefore the heating with pellets is more economical, compared to heating with oil or gas. In comparison with solid fuel heating costs are similar, because of high efficiency and automatic control, but heating with pellets is much more comfortable.
Specification
| Power | 120-500 kW |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Current | 6,5 A |
| Average power consumption | ~150 W |
| Electricity consumption in kW per day | ~3,5 kW |
| Lambda probe | Installed |
| Controller | S.Control MK2 |
| Recommended fuel | Wooden and agro pellets Ø 6 - 8 mm |
| Feeder length | 3 m |
| Feeder weight | 19 kg |
| Burner weight | 130 kg |
| Mounting hole diameter | 390x390 mm |
| Outlet pipe diameter | 382x382 mm |
| Recommended chimney draft | 55 Pa |
| Walking grate system | Yes |
| Noise level | 69 dB |
| Efficiency | Up to 99 % |
| Efficiency in the furnace | Up to 96 % |