Pellet burner BurnPell X 100 – easily maintained, comfortable and modern heating system with pellets for residential, public and commercial premises. With pellet burner BurnPell you can burn biomass pellets: wooden, sunflower husk pellets. Pellet burner could be installed in practically any solid fuel, gas or oil boiler, furnace or stove which power is up to 80 – 100 kW. Pellet burner power varies from 30 kW to 100 kW.
| nstruction for control panel S.Control MK2 |  |
| User's manual for pellet burner BurnPell | |
Product Description
The complete set of pellet burner includes:
- pellet burner BurnPell;
- polyurethane pipe connecting the burner with feeder;
- pellet feeder;
- external digital control panel with LCD display;
- assembly ring with mounting bracket.
The container for pellets is not included and could be ordered separately. As the tank (container) can be used in any capacity, from which a transporter can to take the pellets and transport them into the burner. Thus, set of burner consists of full fuel supply system that solves all problems and you need only to load the container with pellets and set up desired temperature of water.
During burning pellets do not be afraid of electricity supply disruptions, due to the electricity cut-outs. After cut-out burner starts to work by itself and you do not have to re-establish the settings. Control panel display screen shows all the settings in real time. Also, if desired, to respond to changes in outdoor temperature, possible to install an additional outdoor air temperature sensor.
As fuels pellet burner uses biomass pellets – alternative ecologic (green) fuel. Therefore the heating with pellets is more economical, compared to heating with oil or gas. In comparison with solid fuel heating costs are similar, because of high efficiency and automatic control, but heating with pellets is much more comfortable.
Specification
| Power | 30-100 kW |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Current | 5,5 A |
| Average power consumption | ~75 kW |
| Electricity consumption in kW per day | ~2,0 kW |
| Lambda probe | Optional |
| Controller | S.Control MK2 |
| Recommended fuel | Pellets Ø 6 - 8 mm |
| Feeder length | 2 m |
| Feeder weight | 11 kg |
| Burner weight | 25 kg |
| Mounting hole diameter | 210 mm |
| Outlet pipe diameter | 204 mm |
| Recommended chimney draft | 30 Pa |
| Patented fuel blender | Yes |
| Noise level | 69 dB |
| Efficiency | Up to 99 % |
| Efficiency in the furnace | Up to 96 % |